WAV4c DOUBLE BASS
NS WAV4c-DB-AB - 4-string, Amberburst
NS WAV4c-DB-BK - 4-string, Transparent Black
NS WAV4c-DB-BW - 4-string, Brilliant White
NS WAV4c-DB-TR - 4-string, Transparent Red
LENGTH: 132 cm (52")
WIDTH: 15 cm (6")
THICKNESS: 10 cm (4")
WEIGHT: 4-String 8lbs 12.8oz (4.0 kg); 5-String 9lbs (4.1 kg)
SCALE LENGTH: 106 cm (41.73")
STRINGS: 4, E - A - D - G. Compatible with most standard ¾ size double bass strings.
BODY/NECK: Solid, straight grain maple neck and body. Flame maple face on the Amberburst, Trans Red, and Black models; Brilliant White model has solid maple.
FINGERBOARD: Coform material. Hand-graduated with asymmetric relief for easy playability in every position. Intonation referenced with cascading dot markers.
TRUSS ROD: Single action, accessible at nut.
TUNING HARDWARE: Fully encased worm gear tuners, black finish.
BRIDGE PICKUP: The Polar piezo pickup system responds selectively to either vertical vibration (for the sustained plucked sound, like an electric bass guitar), or lateral vibration (for dynamic bowing, and a percussive plucked sound).
ELECTRONICS & CONTROLS: Passive circuit with high impedance output, no batteries required. Volume control, tone control (treble roll off) and a switch to select between Arco and Pizzicato mode.
PERFORMANCE SUPPORT SYSTEMS
TRIPOD STAND: WAV/NXT tripod stand standard, black painted steel, fully adjustable, self-standing tripod design. Folds for easy storage and fits into the WAV gig bag. Weight is 2.7 kg (6 lbs.).
CR TRIPOD STAND: Optional, fully adjustable steel tripod stand. Weight is 3.6kg (8 lbs.).
BASS END PIN STAND: The optional Bass End Pin Stand offers full freedom of movement. Height, tilt and "right bout" angle are fully adjustable providing a more conventional feel. Weight 3 kg (7 lbs).
BASS END PIN STAND CONVERSION KIT: To hold the instrument upright for on-stand performance or when not in use, the Bass End Pin Stand can be attached to the CR Tripod Stand (not compatible with the WAV/NXT Tripod Stand) using the optional End Pin Stand Conversion Kit.
BOOMERANG STRAP SYSTEM: This optional support system has a pivoting friction hub that holds the instrument firmly in place close to the body. Attached with a guitar style strap to its two support arms, the system allows the instrument to be moved into virtually any position in relation to the hands and body as it is played. Weight is .45 kg (1 lbs.).
FRAME STRAP SYSTEM: This optional accessory is a lightweight frame structure that allows full mobility to perform in standing or upright position, holding the instrument out from the body similar to the reference in traditional positioning. The system is supported by a single guitar style strap extending over the left shoulder. Weight is 0.68kg (1.5 lbs.).
TRANSPORT
GIG BAG: A padded gig bag is included as a standard accessory. It has a stand compartment, bow compartment, accessory pocket, handle and adjustable shoulder strap. Loaded weight is 11.2 kg (25 lbs.) including stand, and it fits in the overhead luggage compartment of most commercial aircraft.
FLIGHT CASE: Optional, aluminum edged plywood, 145 cm (57") long; 25 cm (10") wide; 25 cm (10") high. Loaded weight is 24 kg (53 Ibs.), including stand.
Menu
- Home
- Acoustic Violins
- Acoustic Violas
- FLOYD ROSE Headphones
- NS DESIGN Basses
- NS DESIGN Violins
- NS DESIGN Viola
- NS DESIGN Cello
- NS DESIGN Upright Bass
- NS DESIGN Omni Bass
- NS DESIGN Accessories
- CLOVER Basses
- ESH Basses
- SPECTOR Guitars
- JOLANA II Guitars
- JOLANA Accessories
- STROMBERG Guitars
- VEILLETTE Acoustic Guitars
- E-Guitars Custom-made
- E-Ukulele RISA
- DISCOUNTED MODELS
- Strings
Contacts
Phone:
+420 777 649 952
E-mail:
eedistribution@seznam.cz
WHAT´S NEW
New Series NS Design NXTa 21.10.2016
To all NS Design fans! NS Design is proud to introduce new NXTa series! All new NXTa instruments are assembled with active/passive electronic with no need for battery.